Biometric Full Height Turnstile Systems for Secure Sites
Pair IP65 full-height rotor turnstiles with outdoor face and fingerprint readers to stop tailgating and record attendance at construction sites, labour accommodation, factories and ports across the UAE and GCC.
Turnstile models
FHT2300, FHT2300D and FHT2400D
Enclosure height
2300 mm (FHT2300) and 2400 mm (FHT2400D)
Outdoor rating
IP65, stainless steel construction
Quick Answer
What is a biometric full height turnstile?
A biometric full height turnstile is a rotor gate about 2.3 to 2.4 metres tall that lets one person through per authorised rotation, only after a face, fingerprint or finger vein reader verifies them. It prevents climb-over, tailgating and buddy punching. Sion General Trading Co LLC supplies FHT2300, FHT2300D and FHT2400D turnstiles with IP65 ZKTeco BioPro readers for sites, camps, factories and ports in the UAE and GCC.
Key Facts
- Turnstile models
- FHT2300, FHT2300D and FHT2400D
- Enclosure height
- 2300 mm (FHT2300) and 2400 mm (FHT2400D)
- Outdoor rating
- IP65, stainless steel construction
- Emergency egress
- Emergency break-away arms
- Outdoor readers
- ZKTeco BioPro MH40, MH20 and MV30, all IP65
- Supplier
- Sion General Trading Co LLC, Deira, Dubai
Overview
Biometric Full Height Turnstile: What You Need to Know
A biometric full height turnstile combines two proven pieces of entrance control: a full-height rotor turnstile that physically lets only one person through per authorised rotation, and a biometric reader that confirms who that person is. Together they solve problems that waist-high gates and guards cannot, namely climb-over, tailgating, buddy punching and unreliable headcounts. That is why they are specified at construction site gates, labour accommodation, factory perimeters, ports and stadiums, where entrances are often outdoors, lightly supervised and crossed by hundreds of people within a short shift-change window.
This guide explains how to specify a complete lane rather than a turnstile in isolation: which rotor model to choose, which reader to mount and where, how anti-passback and attendance integration work, how to plan throughput for shift peaks, and what happens when power fails or a fire alarm sounds. It is written for project managers, HSE teams, facility managers and MEP contractors in the UAE, Saudi Arabia, Qatar, Oman, Kuwait and Bahrain who need entrance control that survives heat, dust and constant use.
Sion General Trading Co LLC is a Dubai-based supplier, established in 2023, with its office at F204, DBC Building, Al Khaibasi, Deira. It describes itself as an authorised ZKTeco supplier in the UAE and supplies full-height turnstiles together with ZKTeco readers, controllers and attendance software. Sion installs turnstile lanes within the UAE and provides after-sales support from Dubai. For GCC projects outside the UAE, equipment is supplied from Dubai with configuration support, and lead times are confirmed with each quotation.
Product Showcase
Recommended Products — Biometric Full Height Turnstile
FHT2300 Full-Height Turnstile
Single-lane 2300 mm stainless steel rotor turnstile, IP65 outdoor rated with emergency break-away arms, suited to site gates and staff entrances with moderate traffic.
View details
FHT2300D Full-Height Turnstile
Double-lane version of the FHT2300 for entrances that need two passages, such as separate in and out lanes at labour accommodation or factory gates.
View details
FHT2400D Double-Lane Turnstile
Double-lane full-height turnstile with a 2400 mm enclosure and two independent lanes for high-traffic ports, stadiums and large projects with heavy shift changes.
View details
ZKTeco BioPro MH40
IP65 face, fingerprint and card reader with anti-tamper protection and Wiegand output; face verification helps workers with worn or dusty fingers pass quickly.
View details
ZKTeco BioPro MH20
IP65 fingerprint and card reader with Wiegand output, a cost-effective choice for lanes where staff are comfortable with fingerprint verification.
View details
ZKTeco BioPro MV30
IP65 finger vein reader that recognises the vascular pattern beneath the skin, useful where surface fingerprints are damaged by manual work or cement.
View details
ZKTeco FR1500
Compact IP65 fingerprint reader for budget-conscious exit lanes or secondary gates, wired back to the access controller in a nearby protected enclosure.
View details
ZKTeco inBio 260
Two-door IP controller that manages entry and exit readers for turnstile lanes, applies anti-passback rules where configured and keeps working if the network drops.
View details
ZKTeco BioTime
ZKTeco attendance software that turns gate transactions from supported terminals into timesheets, shift reports and payroll-ready exports for contractors and HR teams.
View detailsFeatures & Benefits
Why Choose Our Biometric Full Height Turnstile Solutions
No climb-over, no tailgating
The full-height rotor and enclosure stop people climbing over or squeezing through, while the biometric reader releases one rotation per verified person, so gate headcounts reflect who is actually on site.
IP65 lanes for open sites
An IP65 outdoor turnstile such as the FHT2300 or FHT2400D, paired with BioPro readers carrying the same rating, lets complete lanes stand at open site gates exposed to sun, sand and occasional rain.
Anti-passback control
Entry and exit readers on each lane let the controller enforce anti-passback, refusing re-entry until the person has exited, which stops credentials being handed back across the fence.
Attendance from the gate
Gate transactions can feed BioTime or the access platform's reports where supported, giving contractors and HR an accurate record of time on site without separate time clocks.
Emergency break-away arms
Break-away arms allow evacuation through the lane in an emergency, and turnstile behaviour on power loss or fire alarm is configured and documented during commissioning.
Single or double lane
Choose single-lane FHT2300 units for smaller gates, or double-lane FHT2300D and FHT2400D units where two passages share one footprint, keeping throughput high at shift change.
What is a biometric full height turnstile and when is it needed?
A full-height turnstile is a caged gate, typically 2.3 to 2.4 metres tall, in which a vertical rotor with horizontal arms turns between fixed arms on the enclosure. The rotor turns only when the controller releases it, and its geometry allows one person per segment of rotation. Adding a biometric reader means release depends on verifying a face, fingerprint or finger vein rather than a card that can be lent. The result is a biometric full height turnstile: a gate that records who passed, not just how many.
Not every entrance needs one. Waist-high tripod turnstiles and speed gates cost less and move people faster, and they suit staffed lobbies. A full-height rotor turnstile earns its place where the entrance is unattended or semi-attended, where climbing over a waist-high barrier is a realistic risk, or where accurate headcounts matter for safety. Construction sites, labour accommodation, factory perimeters, port terminals, stadiums and metro or bus depots are the classic cases, because they combine large populations, shift peaks and outdoor locations.
The biometric element answers a separate problem: credential sharing. Cards and PINs can be lent, cloned or used by a colleague to clock someone in. Face recognition and fingerprint readers tie each passage to a person, which is why a full height turnstile with fingerprint reader or face terminal is increasingly specified on large projects where main contractors must report daily manpower to the client and pay subcontractors on verified attendance.
How do you choose the turnstile model and reader?
Start with the turnstile. The FHT2300 is a single-lane 2300 mm stainless steel rotor turnstile, rated IP65 for outdoor use and fitted with emergency break-away arms. The FHT2300D is its double-lane version, and the FHT2400D is a double-lane unit with a 2400 mm enclosure and two independent lanes for high-traffic secure sites. A double lane full height turnstile shares one footprint between two passages, which saves space at a site gate and lets one lane run in each direction, or both inwards during the morning peak.
Next choose the reader. A face recognition turnstile lane using the BioPro MH40 is a common choice for construction and industrial workforces, because workers with cement-worn or dusty fingers can still be verified, and nobody needs to remove gloves. The BioPro MH20 offers IP65 fingerprint and card reading at lower cost, the BioPro MV30 reads finger veins for high-assurance lanes, and the FR1500 provides a compact IP65 fingerprint option. Covered entrances, such as a camp reception, can use a ProFace X terminal, which holds up to 50,000 face templates.
Check capacity and interfaces together. The BioPro MH40 stores up to 5,000 faces and 3,000 fingerprints, while the MH20 stores 3,000 fingerprints, so very large workforces may need a higher-capacity face terminal or a server-based architecture. BioPro readers send Wiegand output to an access controller such as the inBio 260, which then triggers the turnstile's release input. Confirm during design that the turnstile control board, reader output and controller are matched, rather than discovering a mismatch at commissioning.
- FHT2300: single lane, 2300 mm, IP65, emergency break-away arms
- FHT2300D: double-lane version of the FHT2300
- FHT2400D: double lane, 2400 mm, two independent lanes
- BioPro MH40: face, fingerprint and card, IP65, anti-tamper
- BioPro MH20: fingerprint and card, IP65
- BioPro MV30: finger vein, IP65; FR1500: compact IP65 fingerprint
How do anti-passback, attendance and throughput planning work?
Anti-passback stops a person from entering twice without leaving in between. Each lane has an entry reader and an exit reader, and the controller remembers each user's last direction; if someone tries to enter again while still recorded as inside, the turnstile stays locked. An anti-passback turnstile therefore prevents credentials being handed back across the fence and keeps the on-site list accurate for emergency muster counts. Decide whether violations are denied or only logged, and how supervisors reset users who leave through an emergency route.
Attendance works best when it comes straight from the gate. A turnstile attendance system records the exact time each worker passes through, so it reflects time on site rather than time at a clock inside an office. Where the reader is a standalone terminal supported by BioTime, transactions can flow directly into timesheets and shift reports. Where readers are wired to a controller, events are logged in the access software and can be used for attendance reporting where supported. Either way, agree the export format with payroll before go-live.
Throughput planning prevents queues at six in the morning. Count the people who must pass in the busiest 15 to 30 minutes, allow a few seconds per person for verification and rotation, and add lanes until the queue clears within that window. Face recognition is usually quicker than fingerprint at peaks because users do not need to place a finger carefully. Separate entry and exit lanes reduce conflicts, and an accessible service gate beside the turnstiles is essential for wheelchair users, deliveries and equipment.
How should a biometric full height turnstile be installed, powered and maintained?
A full-height turnstile needs a level concrete base, anchor bolts and ducts for power and data cables laid before the slab is finished. Mount readers on dedicated posts or brackets at a comfortable height and angle, ideally under a canopy, so the screen is shaded and users approach in a straight line. On temporary construction sites, pre-cast concrete bases or steel frames allow the lane to be relocated as the project moves. Plan a ventilated enclosure for the controller and power supply, away from direct sun.
Power behaviour must be decided before commissioning. Many full-height turnstiles can be set either to rotate freely or to stay locked when power is lost, and the right answer depends on whether the lane forms part of an evacuation route. Emergency break-away arms provide a further escape path, and a fire alarm input can release the lanes where the turnstile controller supports it. Feed turnstile, reader and controller from a UPS or battery-backed supply so brief interruptions do not lock out a shift, and protect outdoor cable runs against surges.
Hot, dusty sites shorten the life of any outdoor equipment, so build maintenance into the contract. Clean reader lenses and sensors weekly in summer and after sandstorms, check rotor bearings and drive mechanisms, inspect fixings and earth connections, and test break-away arms and power-loss behaviour at regular intervals. On large projects keep a spare reader on site, back up the user database regularly, and record firmware versions so a replacement can be configured quickly. Faulty parts are handled under the manufacturer warranty.
- Level concrete base with anchor bolts and cable ducts
- Reader posts or brackets under shade, facing the approach
- Ventilated enclosure for the controller and power supply
- UPS or battery backup with surge protection
- Documented behaviour on power loss and fire alarm
- Weekly reader cleaning in summer and after sandstorms
Where are biometric turnstiles used in the UAE and GCC, and what drives cost?
In the UAE, common deployments are construction site gates and labour accommodation in areas such as Jebel Ali, Al Quoz, Muhaisnah, Mussafah, ICAD and Sajaa. Labour camp access control combines security with welfare: operators need to know who is inside at night, keep unauthorised visitors out and produce accurate occupancy figures. A construction site turnstile supports HSE induction checks, manpower reporting and subcontractor billing. Factories, logistics hubs and port terminals use the same lane design at perimeter gates to separate staff, contractors and visitors.
Across the GCC, similar requirements appear on Saudi Arabia's giga-projects and industrial cities, Qatar's stadiums and infrastructure sites, Oman's ports and industrial estates, and oil, gas and logistics facilities in Kuwait and Bahrain. A stadium turnstile lane for staff and contractors must cope with short, intense peaks and fit the venue's evacuation strategy, while metro and transport depots use full-height lanes at staff-only perimeters. Sion supplies these projects from Dubai and confirms lead times and shipping arrangements with each quotation.
A full height turnstile price depends on far more than the unit itself. Cost drivers include single or double-lane configuration, reader technology per lane, controllers and software licences, canopies, posts and bases, civil works, power backup, cable distances, installation conditions and, for projects outside the UAE, freight and import duties. A request that includes a site plan, peak headcount and the number of lanes lets suppliers quote like for like. Sion provides project quotations on request rather than fixed list prices, because every site differs.
Full-height rotor turnstile vs tripod turnstile for workforce entrances
| Aspect | Full-height rotor turnstile | Tripod turnstile |
|---|---|---|
| Height | 2300 to 2400 mm enclosure | Waist-high |
| Climb-over and jumping | Prevented by the full-height cage | Possible without supervision |
| Typical location | Unattended perimeters, site gates, camps and ports | Staffed lobbies, canteens and internal areas |
| Outdoor use | IP65 rated models (FHT2300, FHT2400D) | Usually installed under cover |
| Emergency egress | Break-away arms plus a separate emergency gate | Fail-safe arm drop on power loss |
| Footprint and investment | Larger footprint, higher investment | Compact, lower investment |
Industries
Who Uses Biometric Full Height Turnstile?
Construction sites
Site gates that verify every worker, enforce induction expiry dates and feed daily manpower reports for main contractors and subcontractors.
Labour accommodation
Camp entrances that control who is inside at night, keep visitors out and support accurate occupancy and welfare records for operators.
Factories
A turnstile for factories separates production staff, contractors and visitors at the perimeter and records shift attendance at the same time.
Ports and logistics
Terminal and warehouse perimeters where outdoor-rated lanes control staff, drivers and contractors around the clock in humid, salt-laden coastal air.
Stadiums and venues
Staff, media and contractor entrances where full-height lanes handle intense peaks and fit within the venue's evacuation plan.
Metro and transport depots
Staff-only perimeters at depots and yards, keeping maintenance areas secure while recording exactly who entered and when.
Warehouses
Distribution centres in industrial areas controlling yard access for pickers, drivers and agency labour with biometric verification at every passage.
Oil, gas and utilities
Plant and substation perimeters requiring high-assurance identity checks with finger vein or face readers and strict anti-passback for muster counts.
How It Works
Our Process, Step by Step
- 01
Site and traffic review
Share the site plan, peak headcount, shift times and gate location so lane count, direction of travel and reader type can be matched to real traffic.
- 02
Lane design and quotation
Sion proposes turnstile models, readers, controllers, software, canopies and power backup per lane, lists civil requirements and confirms the lead time with the quotation.
- 03
Civil works and cabling
The client's contractor prepares the level concrete base, anchor points and cable ducts, following the turnstile drawings so lanes can be fixed without rework.
- 04
Installation and configuration
In the UAE, Sion installs turnstiles and readers, wires controllers and configures anti-passback, access levels and attendance exports; GCC projects receive remote configuration support.
- 05
Enrolment, testing and handover
Workers are enrolled, every lane is tested for normal, power-loss and emergency behaviour, supervisors are trained, and after-sales support continues from Dubai.
Coverage
Areas We Serve — United Arab Emirates
Dubai and the Northern Emirates
Installation of each full height turnstile in Dubai, Sharjah, Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah, covering sites and camps in Jebel Ali, Al Quoz and Muhaisnah.
Abu Dhabi
Industrial and labour accommodation zones in Mussafah and ICAD, port-related facilities and large infrastructure projects, with on-site installation by Sion's UAE team.
Saudi Arabia
Giga-project sites, industrial cities and logistics hubs supplied from Dubai with documentation and remote configuration support, with lead time confirmed per quotation.
Qatar
Stadium, infrastructure and industrial sites in Doha and beyond, supplied from Dubai with lane design and configuration guidance from Sion's team.
Oman, Kuwait and Bahrain
Ports, oil and gas facilities and factories in Muscat, Sohar, Kuwait City and Manama, supplied from Dubai with remote configuration support.
Why Sion General Trading
A Dubai Partner for Biometric Full Height Turnstile
Dubai-Based Supplier
Sion General Trading Co LLC operates from Al Khaibasi, Deira, Dubai and supplies customers across the UAE, the GCC and Africa.
Genuine Products
Genuine ZKTeco, Hikvision, Dahua and IMOU products supplied with manufacturer warranty and proper documentation.
Technical Pre-Sales Advice
Help choosing devices, controllers, locks and software so the system matches your doors, users, network and budget.
Installation in the UAE
On-site installation, configuration and training across the emirates, with remote setup support for customers abroad.
After-Sales Support
Configuration, software and warranty support by WhatsApp, phone and email during business hours, Monday to Saturday.
Arabic & English
Devices and software set up with Arabic or English interfaces where supported, for bilingual teams and visitors.
FAQ
Biometric Full Height Turnstile — Frequently Asked Questions
The cost of a biometric full height turnstile depends on single or double-lane configuration, reader type, controllers, software licences, civil works, canopies, power backup and installation conditions. Sion General Trading prepares quotations per project rather than publishing fixed prices, so send your site plan, peak headcount and required number of lanes for an accurate, like-for-like quotation.
Yes. The FHT2300 and FHT2400D are IP65 outdoor rated, and BioPro MH40 and MH20 readers are also IP65. Mount readers under a canopy so screens and sensors are not in direct sun, keep the controller and power supply in a ventilated enclosure, and clean readers more frequently during summer and sandstorm periods.
Face recognition is usually better for construction workforces, because worn, cracked or cement-covered fingers often fail fingerprint scans and face verification is quicker at shift change. Fingerprint readers such as the BioPro MH20 remain a lower-cost option for smaller teams, and finger vein readers like the BioPro MV30 suit lanes needing high assurance where surface fingerprints are unreliable.
An anti-passback turnstile refuses entry to anyone the system already records as inside, so a credential cannot be passed back across the fence for a second person. It needs entry and exit readers on the lane and a controller that tracks direction. It also keeps on-site lists accurate for emergency headcounts, provided supervisors reset users who leave through emergency exits.
Yes, where supported. A biometric turnstile gate records each passage with a timestamp, and standalone terminals supported by ZKTeco BioTime can send transactions directly into timesheets and shift reports. Readers wired to a controller log events in the access software, from which attendance reports can be produced. Agree the export format with payroll or your HR system before go-live.
Both are double-lane full-height rotor turnstiles. The FHT2300D is the double-lane version of the 2300 mm FHT2300, while the FHT2400D has a taller 2400 mm enclosure and two independent lanes intended for high-traffic secure sites. Both families are described as IP65 outdoor rated with emergency break-away arms, so site traffic, footprint and project specification usually decide between them.
Behaviour on power loss is configurable on many models and should follow the site's evacuation plan: free rotation for lanes on an escape route, or locked where a separate emergency gate is provided. Emergency break-away arms give an additional escape path, and a fire alarm input can release lanes where supported. A UPS keeps lanes running through short interruptions.
Sion installs turnstiles within the UAE. For projects in Saudi Arabia, Qatar, Oman, Kuwait and Bahrain, equipment is supplied from Dubai with documentation and remote configuration support, and installation is carried out by the client's contractor or chosen integrator. On-site support for larger GCC projects can be discussed during quotation, and lead times are confirmed with each quotation.
It depends on the length of the shift-change window and how quickly each person is verified. Count the workers who arrive in the busiest 15 to 30 minutes, allow several seconds per person for verification and rotation, divide to estimate lanes, and add one for resilience. Face readers usually shorten verification time. Sion can help calculate lane numbers from your actual shift pattern.
Related Searches
- full height turnstile with fingerprint reader
- face recognition turnstile
- full-height rotor turnstile
- construction site turnstile
- labour camp access control
- anti-passback turnstile
- IP65 outdoor turnstile
- double lane full height turnstile
- turnstile attendance system
- full height turnstile price
- biometric turnstile gate
- full height turnstile in Dubai
- stadium turnstile
- turnstile for factories
Get a Quotation for Biometric Full Height Turnstile
Tell us your requirements — Sion General Trading Co LLC replies with recommended products, availability and a quotation.
Published by Sion General Trading Co LLC, Dubai · Last updated